Filter
Top Products
QP-402H CENTRIFUGAL PUMP — OPERATION AND PARTS MANUAL— REV. #1 (04/02/08) — PAGE 7
This pump, other property, or the
surrounding environment could
be damaged if you do not follow
instructions.
NOTE
Other important messages are provided throughout this
manual to help prevent damage to your pump, other
property, or the surrounding environment.
ALWAYS place the engine ON/OFF
switch in the OFF position, when the
pump is not in use.
ALWAYS wear approved eye and
hearing protection.
NEVER operate equipment with covers,
or guards removed. Keep fingers, hands,
hair and clothing away from all moving
parts to prevent injury.
CAUTION - Rotating Parts
CAUTION - Accidental Starting
CAUTION - Sight and Hearing Hazards
CAUTION - Equipment Damage Messages
QP-402H — SAFETY MESSAGE ALERT SYMBOLS
If the pump loses prime while operating, the remaining
water in the casing will reach near-boiling temperatures
within approximately 15 minutes. NEVER operate the pump
without water flowing through the pump. Allow pump casing
to cool to the touch before opening the fill or drain caps or
before removing any hoses to avoid serious burns and
bodily injury to the operator.
WARNING - Do Not Run the Pump Dry