Filter
Top Products
PAGE 20 — MTX80SD RAMMER • OPERATION AND PARTS MANUAL — REV. #0 (07/20/12)
TROUBLESHOOTING
Troubleshooting (Rammer)
Symptom Possible Problem Solution
Engine runs but rammer jumps
erratically or not at all.
Operating speed of throttle lever is
incorrectly set?
Set throttle lever to correct position.
Oil in excess? Drain excess oil. Bring to correct level.
Clutch slips? Replace or adjust clutch.
Spring Failure? Replace spiral spring.
Speed of engine improper?
Adjust engine speed to correct
operating RPM setting.
Soil over-compacted? Shut down machine and test soil.