Filter
Top Products
5
Steam cleaning floors
Attach the micro-fibre floor cloth (25) to the
floorhead (23), securing it in place by tightening
the toggle (24).
If cleaning carpet, rest the floorhead (23) with
the micro-fibre floor cloth (25) attached into the
carpet glider (26) to make it easier to move the
floorhead across the carpet.
NOTE: The carpet glider is designed to make it
easier to move the floorhead across the carpet
and is intentionally a loose fit on the floorhead.
1
2
Remove the water tank (17) by pushing up the
water tank release slide (15), then pull the water
tank forwards and out using the water tank
removal grip (16). Once removed, turn the water
tank upside-down and unscrew the cap on the
base. Fill the water tank.
IMPORTANT: To prevent limescale build-up in
the water tank, never fill the steam cleaner’s
tank with anything other than deionised,
demineralised or distilled water (available from
most leading supermarkets). Any problems
arising from limescale will invalidate the product
guarantee.
Replace the screw cap firmly and return the water
tank into the main body
(13).
3
4
WARNING: Before switching ON, ensure the
floorhead is located safely away from persons
or animals.
Plug in at the mains outlet. Switch the product on
using the on/off button
(14). The low steam level
indicator light (11) will illuminate and steam will
be ready to be emitted from the floorhead after
around 30 seconds.
Select the desired steam level by pressing the
steam level select button
(8) until the indicator
light next to your desired level is illuminated:
low steam (11), for use on laminates and wood.
medium steam (10), for use on vinyls or carpets.
high steam (9)) for use on ceramics.
Operate the trigger intermittently to prevent
over-wetting the floor, enabling faster drying.
Never hold the steam cleaner continuously in one
place, as excess moisture and heat may
adversely affect some floor surfaces.
VC720504MUK Rev1_Instruction Book 07/08/2013 16:28 Page 5