![](http://pdfasset.owneriq.net/b/25/b2587f32-3fb4-4cb5-a928-b4f88a714eb9/b2587f32-3fb4-4cb5-a928-b4f88a714eb9-bg1.png)
Steam cleaner
Please read and keep these instructions
Quick start
1
Fill the tank up to a maximum of 1.0 litre of water
(using warm water will reduce the heat-up time).
Screw cap on and tighten fully.
2 Attach the hose and required accessories.
3 Connect to the power supply.
4 Pr
ess the on/off button to start heat-up. When
orange light turns off, the steam is ready.
5 Press the trigger on the handle to release the
steam.
6 Aim the steam safely: at the start water may be
ejected. Hold over a sink or bucket until excess
water has cleared.
Descaling
Descale regularly, do not wait for a problem to
occur. In very hard water areas we recommend using
distilled water.
www.morphyrichards.com