Filter
Top Products
Emptying tank/replacing
paper bag
1 Switch the unit OFF and disconnect from
the mains.
2 Release the tank latches B and lift off the
upper body.
3 Option 1 No bag fitted, empty rinse and
dry the tank.
Option 2 Bag fitted, remove the full bag
and replace it with a new bag G.
4 Check condition of filter and clean if
necessary.
5 Refit upper body.
Blower function
The cleaner can be used as a powerful
blower by inserting the hose into the outlet
elbow Í on the upper body of the cleaner. I
• Always ensure that the hose, tank and
accessories have been cleaned of any
debris before operating the blower
function.
• Uses include: blowing leaves into piles,
blower out dust from difficult to get areas,
faster drying of paint.
• The blower must not be directed towards
people.
Storage
When not in use, the cable can be stored
by wrapping it around the cord hook Ì
positioned on the upper body. Hook the end
of the cable into the slot provided on the
cable hook. J
• The extension tubes and nozzle can be
stored in the designated areas on top of
the cleaner.
• The hose can also be stored by wrapping
it around the extension tubes.
6
I
J
·
Ì
Ó