Filter
Top Products
5
Switching on
Always pull out the supply cable
to it’s maximum length. Plug the
appliance into the mains supply.
Ensure that the Eco Switch ‡ is
set to the required setting before
switching the cleaner on D.
Push the on/off switch fl to
start the motor.
Controlling suction
power
The suction power can be varied
to suit the surface being
cleaned, by using the Eco
Switch ‡ E, see table for
guideline settings.
The suction power can also be
adjusted using the fingertip
control on the handle Û F.
Closed: full suction
Open: reduced suction
Recommended
settings
Alter the power setting to suit
the surface (as shown in the
table, left).
Open Close
Eco Switch Power setting Application
Curtains and
delicate fabrics
Textiles and
upholstery
Floor coverings,
such as rugs,
economy setting
for carpets
Carpets or hard
floor coverings
F
D
E
‡
FFoorr ddeettaaiillss ooff ootthheerr MMoorrpphhyy RRiicchhaarrddss pprroodduuccttss,, pplleeaassee sseeee oouurr wweebbssiittee::
73270 rev2 27/10/08 09:52 Page 5