Filter
Top Products
Loosen lock nuts and screws on yoke
till you can not feel screw on inside
of yoke.
Remove keeper from cross pin and
then cross pin from yoke. Replace
keeper on cross pin and save.
12
11
Lift mounting neck to mounting Plate and align
s
crews.
7
S
ecure mounting neck to the mounting plate
w
ith four screws to become a complete mount-
ing bracket.
8
Loosen set screw that holds ball.
9
Slide ball down and remove pin save
pin for later.
10
Install top decor
ativ
e co
v
er over
downrod onto fan body
. Then install
y
ok
e co
v
er.
Install canopy onto downrod.
18
17
Thread wiring through downrod.
Align hole in downrod with hole in
y
oke and install cross pin. Install
downrod into y
oke. Install k
eeper
into cross pin.
13
Tighten 2 downrod set screws and
lock nuts.
14
Install glass into cage and place on
fan body.
15
Install 6 x 15 watt incandescent can-
delabra bulbs.
16