Filter
Top Products
Attach blade brackets to blades using
the blade bracket screws and wash-
ers provided.
20
Check the motor for plastic shipping stabilizer
t
abs, and remove them if they are present.
A
ttach blade assembly to motor using the
motor screws and washers provided. Tighten
s
crews securely.
22
Loosen 2 screws and remove 1 screw
from motor plate. Save removed
screw for use later.
23
Thread capacitor and 9 pin plug
through switch housing plate.
24
Install by twisting clockwise, replace
screw removed from motor plate.
Tighten all 3 screws securely.
25
Connect plug from fan to switch
housing plug.
26
R
emov
e switch housing screws.
27
Install switch housing cap using
screws remo
v
ed. Tighten securely
.
31
19
L
ift Canopy to ceiling aligning the key hole slots
with the screws on the bottom of the Mounting
b
racket. Rotate the canopy Counter Clockwise
t
o lock in place. Tighten the screws to secure
the Canopy. See inset for Keyhole shape
Black capacitor box needs to be
stuck to the switch housing. Not
being attached can cause motor
noise.
R
emove twin adhesive tape from the
black capacitor as shown above.
29
28
Place and press firmly on the capaci-
tor to stick it to the switch housing.
Be sure it is secure.
30