Filter
Top Products
Attach blade brackets to blades using the blade
bracket screws and washers provided.
22
Check the motor for plastic shipping stabilizer
tabs, and remove them if they are present.
Attach blade assembly to motor using the
motor screws and washers provided. Tighten
screws securely.
23
After attaching blade; reinstall the switch hous-
ing using the three screws previously removed.
24
F
or pullchain controls, follow diagram above.
M
ake sure that all exposed wiring is secured
inside wire nuts. Note: Wires from house may
v
ary in color and may not include ground wire.
A
fter wiring is complete, gently push wires into
junction box with wire nuts pointing upward.
R
efer to point 3 of safety tips.
20
H
ouse
Fan
Black
W
hite
G
reen
B
lack
W
hite
Green(downrod)
Green(Bracket)
B
lue
For control of fan and optional light from wall
location, follow diagram above. NOTE: A profes-
s
ional electrician is recommended for this type
of installation.
21
Light Switch
Fan Switch
Wall
Control
19
Lift Canopy to ceiling aligning the key hole slots
w
ith the screws on the bottom of the Mounting
b
racket. Rotate the canopy Counter Clockwise
to lock in place. Tighten the screws to secure
t
he Canopy. See inset for Keyhole shape