Filter
Top Products
Loosen 3 screw on light plate as
shown.
Plug white wire from fan to white
wire from light kit. Then plug black
wire from fan to black wire from light
k
it.
32
33
Place light kit over screws and twist
direction of arrow into place. Then
tighten all 3 screws securely.
34
Install glass onto light kit, install
rubber washer and hex nut to hold in
place and tighten in direction of
arrow.
36
Install 3 x 40 watt incandescent can-
delabra bulbs. Bulbs not included.
35
Install finial cap and tighten in direc-
tion of arrow.
37
Twist lower cover plate into place by
t
wisting in direction of arrow.
Replace 1 screw removed and tighten
all 3 screws securely.
31
R
emo
v
e co
v
er b
y snaping off from top or bot-
tom. Remove battery cover. Install 12V battery
into w
all remote. Dur
acell MN21 / Ev
eready A23
/ GP 23A all 12V.Attach cover of remote by plac-
ing o
v
er buttons and snap the battery cover in
place.
Place face plate over battery compartment and
buttons. Place remote over 2 pins on front
cover. Attach cover of remote by placing over 4
pins and snaping into place.
Install w
all control unit to outlet bo
x
using machine screws pro
vided.
33
Attach front cover to wall control
with screws provided. Snap battery
cover in place.
34
32
31
HAND HELD INSTALL
W
ALL MOUNT INST
ALL