While the fan assembly is still on the
ground thread the safety cable
through the mounting bracket.
2
CANADIAN MOUNTING SYSTEM INSERT
L
ift fan assembly and install the safety cable
d
irectly to the building structure using the 3”
lag screw and plain washer provided. Before
p
roceeding to the the next step make sure that
t
he cable is properly installed and will support
the fan weight. Make sure the screw washer
a
nd safety cable are installed using the order
pictured above.
3
F
eed motor lead wires through downrod/canopy
assembly and insert downrod into motor yoke.
N
ext, insert clevis pin through yoke and down-
rod and secure with cotter pin. (see Inset)
Tighen both yoke set screws to further secure
d
ownrod.
1
Mounting
B
racket
Safety Cable
Install mounting brackets to outlet box
in ceiling using the screws and wash-
ers provided with the outlet box.
4
CANADIAN SAFETY TIPS
WARNING: MOUNT ONLY TO AN OUTLET BOX
MARKED ACCEPTABLE FOR FAN SUPPORT
All set screws must be checked and retightened
where necessary before installation.
Carefully lift fan assembly onto mounting brack-
et. Rotate fan so that the notch on the ball
engages the ridge in the mounting bracket. This
will allow hands-free wiring. For wiring instruc-
tions please refer to page 4 step #7.
5