Filter
Top Products
1
DFX & DBX Series Vent Free Fireplaces
In normal operation at full rate after 15 minutes, the follow-
ing flame appearances should be observed:
Burner will have a random pattern of yellow flames.
There should be glowing embers in front
of burner.
Innormal operation at full rate after 15 minutes, the follow-
ing flame appearances should be observed:
The flames inside the one-piece log may be yellow. The
flames should extend approximately " - 4" above the log.
The front flames and embers will be an opaque
orange color during the burn off time.
LG703
24VFSC log flames
LG703
Figure 25 -
DFX24C Log Flame Appearance
LG704
32VFSC log flames
LG704
Figure 26 -
DFX32C Log Flame Appearance
2” - 4”
LG705
24DBXC log flames
LG705
Figure 27 -
DBX24C Log Flame Appearance
Do not allow fans to blow directly into
the fireplace. Do not place a blower inside the burn area of the firebox. Ceiling fans may
create drafts that alter flame patterns. Sooting and improper burning will result.
During manufacturing, fabricating and shipping, various components of this appliance are
treated with certain oils, films or bonding agents. These chemicals are not harmful, but may
produce annoying smoke and smells as they are burned off during the initial operation of
the appliance, possibly causing headaches or eye or lung irritation.
The initial break-in operation should last two to three hours with the burner at the highest
setting. Provide maximum ventilation by opening windows or doors to allow odors to dis-
sipate. Any odors remaining after this initial break-in will be slight and will disappear with
continued use.
This appliance must not be used with glass doors in the closed position. This can lead to
pilot outages and severe sooting outside the fireplace.