Filter
Top Products
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
SINK DESCRIPTION
• Manufactured of 22 gauge, type 301 nickel-bearing
stainless steel
• The single bowl is 21-1/4" x 16" x 6-1/2"
• The sink ledge has three fixture mounting holes,
1-1/2" in diameter and 4" on center
• Has one 3-1/2" diameter recessed drain opening
• Soundshield undercoating maximizes sound deadening
and inhibits condensation
• The exposed surfaces are polished to a lustrous satin
tone finish
• Includes all necessary mounting hardware
CUT OUT DIMENSIONS
• Cut out dimensions are 24-3/8" x 21-3/8",
with a 1-1/2" corner radius. A tolerance of plus
or minus 1/16" is acceptable
STANDARDS
• Third party certified by IAPMO to meet ASME A112.19.3
and all applicable specifications referenced therein.
Also meets applicable requirements of ANSI A117.1
WARRANTY
• Warranted for five years against material or
manufacturing defects
Installation Detail
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"
U" CHANNEL
SINK
CLAMP
C
OUNTERTOP
S
EALANT MATERIAL
6-1/2"
(165mm)
22"
(559mm)
WIDTH
2"
(51mm)
16"
(406mm)
BOWL
4"
(102mm)
4"
(102mm)
1-1/2" DIA. TYP.
25" (635mm)
LENGTH
4"
(102mm)
3-1/2"
DIA. TYP.
1-1/2" R. TYP.
10-5/8"
(270mm)
12-1/2"
(318mm)
1-7/8"
(48mm)
21-1/4" (540mm)BOWL
2-3/4" R. TYP.
Excalibur
®
Single Bowl Kitchen Sink
Model:
22831
(E-2522-3)
04/05