Mitsumi electronic LGH-F470RX3-E Air Conditioner User Manual


 
4
Specifications
* The values given in the table for the sound level reflect the levels measured at a position 59 inch immediately below the unit in an anechoic
chamber.
* The sound at the air outlets is the values at a 45° angle, 59 inch in front of the unit.
* The above values apply during Lossnay ventilation when the fan speed is set to extra high speed.
* The values are under 230V 60Hz.
Model name
Voltage (V)
Line
frequency
(Hz)
Current (A)
Power
consumption
(W)
Static
pressure
Air volume
Sound level (dB(A))
Excharge efficiency (%)
Weight
(Ibs)
Air
outlets
Below
the unit
(CFM)
Temperature
Enthalpy
Heating Cooling
1-Phase
208 - 230
LGH-
F300RX
3-E
60 1.3 278 300 69 62 44 73
1-Phase
208 - 230
LGH-
F600RX
3-E
60 2.9 654 600 69 62 44 159
1-Phase
208 - 230
LGH-
F1200RX
3-E
60 5.7 1290 1200 69 62 44 395
0.65
0.80
0.75
(in. H
2
O)
44
47
52
36
1-Phase
208 - 230
LGH-
F470RX
3-E
60 2.5 560 470 69 62 44 1430.96 50.539
39
41
Consult with your dealer about the after-sales services provided for this
Lossnay product.
After-sales servicing
Assembly after maintenance
1. Bearing in mind the following points, assemble the parts following the
sequence for their removal in reverse.
Align the air filter with the grooves on the Lossnay and holder and
push it in.
When installing the air filters, take care not to damage the exposed
surfaces of the Lossnay cores.
2. Press the filter button on the remote controller (PZ-41SLB-E) two
times in succession.
(This clears the Lossnays operating time cumulative data.)
Maintenance (Continued)
If you hear strange sounds, if no air is blown out or if some other
trouble occurs, switch off the power and contact your dealer.
Consult with your dealer concerning the cost of inspection or
repair work.
Relevant button
FILTER
(Press twice)
FILTER
Relevant display items
MITSUBISHI ELECTRIC CORPORATION