Mitsubishi DXK15Z5-S Air Conditioner User Manual


 
–10–
AUTO HI MED LO
NOTE
Temperature adjustment during AUTO
Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the button or the button.
During automatic operation, 24°C is preset both for heating and cooling.
AUTO mode operation
Automatically selects the operation mode (COOL, HEAT, DRY) depending on the room temperature when switched on.
1
When a change in temperature is required.
Press the or button.
If you do not want the AUTO mode program, change
to COOL, HEAT, DRY or FAN instead of AUTO.
Page 11
Airflow direction adjustment procedure.
Page 12
To stop: Press the ON/OFF button.
Each time the button is pressed, the switch over occurs in the following order
–6 –5 ............ –1 ±0 +1 ............ +6.
When +6 is indicated, even if the button is pressed, the indicator does not change.
Each time the button is pressed, the switch over occurs in the following order
+6 +5 ............ +1 ±0 –1 ............ –6.
When –6 is indicated, even if the button is pressed, the indicator does not change.
When the unit is not in AUTO mode:
Press MODE button.
Move the [ mark] to the (Auto) position.
Point the remote control toward the air-conditioner, and
Press the ON/OFF button.
1
2
When it is a little cold
Press the
button.
When it is a little hot
Press the
button.
Operation capacity by your choice FAN SPEED
Set automatically by microcomputer AUTO
Powerful operation with high capacity HI
Standard operation MED
Energy-saving operation LO
FAN SPEED
Press the FAN SPEED button.
Move the [
mark] to the preferred fan speed position.
You can choose the capacity of your air-conditioner
when heating mode, cooling mode or fan mode.
In case air is not blowing out during the operation.
Page 20
Display in OFF status
The current time and preset OPERA-
TION MODE are displayed while the
air conditioner is turned off.
Remote Control display
-6 -5 -4 -3 -2 -1
+
0+1+2+3+4+5+6
18 19 20 21 22 23 24 25 26 27 28 29 30
Setting
temp.(
°C
)
When changing FAN SPEED from HI to LO, the sound of
refrigerant flowing may be heard.
NOTE
RLC012A002A_EN_001-022 4/8/14, 11:0110