Mitsubishi Electronics SRK80ZR-S Air Conditioner User Manual


 
– 16 –
If it is pressed while the unit is off
SLEEP TIMER operation starts with the previous operation settings, and the
air-conditioner is turned off after the set time lapses.
If it is pressed while the unit is running
The air-conditioner is turned off after the set time lapses.
Every time the button is pressed, the display changes as follows:
... (Units of one hour)
No display
(canceled)
Example: You prefer it to stop after 7 hours.
Set to
The timer light (yellow) is on.
The unit stops after the set time lapses.
SLEEP TIMER operation
The unit will stop automatically after the set time lapses.
The set temperature is automatically adjusted according to the lapse time in order to avoid too much cooling or heating. Page 18
Press the SLEEP button.
1
How to cancel
Press the CANCEL button to turn off the SLEEP
display.
Changing of set time
Set a new time by pressing SLEEP button.
SLEEP operation will not function during ALLERGEN CLEAR operation.
Cannot be set at the same time with OFF-TIMER.
NOTE
OFF-TIMER operation
The unit stops automatically when the set time comes.
With the air-conditioner turned off, start the operation from Step 1. With the air-conditioner running, start from Step 2.
Example: You prefer it to stop 22:30.
Press the ON/OFF button.
Press the OFF-TIMER button.
OFF TIMER display is blinking.
Press the “ or (TIMER)” button.
Every time the button is pressed, the display is switched in the order of:
0:00 0:10 0:20
...
(Units of ten minutes)
1:00 1:10
Every time the button is pressed, the display is switched in the order of:
0:00 23:50 23:40
...
(Units of ten minutes)
23:00 22:50
Set at 22:30.
3
1
4
Press the SET button.
The display changes from blinking to steady lighting and the setting is
complete.
The timer light (yellow) is on.
2
How to cancel
Press the CANCEL button to turn off the timer
display.
The unit stops at the end of the set period of time.
Make sure to press the button within 60 seconds from the last operation
in step 3, otherwise the setting is not completed.
The current time is not displayed during OFF-TIMER operation.
OFF-TIMER operation will not function during ALLERGEN CLEAR
operation.
Different from SLEEP TIMER operation, automatic set temperature
adjustment is not done during OFF-TIMER operation.
Changing of set time
Set a new time by using the OFF-TIMER button.
NOTE
(canceled)
RLD012A002G_EN.indd 16RLD012A002G_EN.indd 16 2015/02/27 14:36:412015/02/27 14:36:41