Mitsubishi Electronics SRF35ZMX-S Air Conditioner User Manual


 
–7–
Unit display section
Name of each part and its function
Buzzer sound for remote control
When preset temperature 24°C, automatic operation and automatic airflow are selected, the buzzer sound (PIPI) is produced.
When turning off the air conditioner by pressing ON/OFF button (except CLEAN mode), the buzzer sound (PI) is produced.
This function is useful for operating the air conditioner in the darkness.
NOTE
Preset temperature
Air flow setting
Wireless remote control
Wireless remote
control holder
Natural enzyme filter
(Green)
Photocatalytic washable
deodorizing filter (Orange)
Battery
(R03 (AAA, Micro) ×2)
Wood screw (Quantity:2)
(for remote control holder mounting)
Accessories
AIR SELECTION button
AIR OUTLET SELECTION light (green)
Illuminates during upper air outlet operation.
TIMER light (yellow)
Illuminates during TIMER operation.
This button can be used for turning on/off the unit when re-
mote control is not available.
Page 8
HI POWER Light (green)
Illuminates during HIGH POWER operation.
Blinks during heating preparation.
Unit ON/OFF button
RUN (HOT KEEP) light (green)
Illuminates during operation.
Blinks when airflow stops due to the ‘HOT
KEEP’
,
CLEAN operation
’and ‘
operation
mode invalid
’.
Remote control signal receiver
1.5 sec.
ON
OFF
0.5 sec.
HOT KEEP
3 sec.
1 sec.
ON
OFF
CLEAN operation
ECONO light (green)
Illuminates during ECONOMY operation.
Use this button to switch between the combination of
upper and lower air outlets and upper air outlet.
Page 13
Page 24
Operation mode
invalid
ON
OFF
0.5 sec.
0.5 sec.
Page 30
1.5 sec.
ON
OFF
0.5 sec.
RFB012A006C_EN_001-032_0409 4/9/14, 9:397