Mitsubishi Electronics SKM28ZD-S Air Conditioner User Manual


 
13
Operation capacity by your choice FAN SPEED
Set automatically by microcomputer AUTO
Powerful operation with high capacity HI
Standard operation MED
Energy-saving operation LO
Remote control handling procedure
Replacing the batteries
The following cases signify exhausted batteries. Replace old batteries with new ones.
Receiving beep is not emitted when a signal is transmitted.
Indicator fades away.
On the battery is printed its expected life. This may be shorter
than that of the air conditioner, depending on the date of manu-
facture.
However, the battery may still be in working order after expiry
of its nominal life.
About TIMER operation
About FAN SPEED
You can choose the capacity of your air conditioner when heating or cooling.
About Amenity facilities
Amenity facilities enable to start the operation a little earlier, so that the room
approaches optimum temperature at ON time when the operation is started by
ON-TIMER.
Mechanism
The room temperature is checked
60 minutes before the timer is at
ON. Depending on the tempera-
ture at that time, the operation
starts 5 to 60 minutes before the
timer is at ON.
The Amenity facility only func-
tions for COOL and HEAT op-
eration mode (including AUTO).
It does not work for DRY mode.
Remove back lid and take out old batteries.
Insert new batteries. (SUM-4 or R03x2)
Close back lid.
When the indicator shows any abnormal condition, Press the reset
switch with the tip of a ballpoint pen.
In COOL operation
(Stop) Operation starts
Set temperature
Check the room
temp. 60 mins.
in advance.
Set time
1
2
3
(Operation)
Attention to
the , and .
marks
Don't use old and new batteries together.
Remove the batteries when the remote control is not used for a
long period.
The life of a battery conforming to JIS or IEC is 6 to 12 months
with normal use. If used longer, or when an unspecified battery
is used, liquid may leak from the battery, causing the remote
control to malfunction.
NOTE
When changing FAN SPEED from HI to LO, the sound of
refrigerant flowing may be heard.
NOTE
RWA012A226C_En 04.11.10, 4:06 PM13