Mitsubishi Electronics PUH-2.5AKA PUH-3VKA* Air Conditioner User Manual


 
Stylish wireless remote controller with all the latest programming features
Wireless remote controller for PLH-AAK
Mr. SLIM Convenient Remote Controller
FAN SPEED SELECT button
Used to change fan speed.
VANE CONTROL button
Used to change airflow direction.
MODE SELECTION button
Used to select operating modes —
Cool, Dry, and Heat, and Auto.
TIMER CONTROL buttons
STOP (OFF timer): When this function is
activated, the air conditioner will auto-
matically stop at the preset time.
START (ON timer): When this function is
activated, the air conditioner will auto-
matically start at the preset time.
Fan speed indicator
Displays the fan speed setting
(HIGH or LOW).
HOUR and MINUTE
buttons
Used to set the time and timer settings.
TIMER button/
RESET button
Advanced MA remote controller
Wired remote controller*
DOT LIQUID CRYSTAL display
MULTI-LANGUAGE display
OPERATION CONTROL function
WEEKLY TIMER
6
Twin Multi Operation
Note
The capacity of both indoor units must be identical.
Different types of indoor units with identical capacities can be
connected.
The height difference between both indoor units must be 1meter or
less.
When two units are connected, the main unit can be used to control
the operation of all units.
2.5HP 3HP
PEH-2.5EAK
PKH-3FAK
PCH-3GAK
PLH-3AAK
PEH-3EAK
Twin-multi
Outdoor unit
50:50
PUH-5YKSA
2.5 + 2.5
PUH-6YKSA
3 + 3
Multi-distribution pipe
SDD-50S-E
Applicable indoor units
Outdoor Unit and Twin-Multi Combinations
INDOOR UNIT
INDOOR UNIT
OUTDOOR UNIT
Multi-Distribution Pipe
Two indoor units can be connected to a single outdoor unit
and all units can be operated simultaneously from a single
remote controller using the optional multi-distribution pipe
(only indoor units of the same capacity and type can be
connected).
*Please refer to page 4.