Filter
Top Products
3
Gravimeter
Unit
[3] Service tools
Use the below service tools as exclusive tools for R410A refrigerant.
No. Tool name Specifications
1 Gauge manifold
· Only for R410A
· Use the existing fitting specifications. (UNF1/2)
· Use high-tension side pressure of 5.3MPa·G or over.
2 Charge hose
· Only for R410A
· Use pressure performance of 5.09MPa·G or over.
3 Electronic scale
4 Gas leak detector
· Use the detector for R134a, R407C or R410A.
5 Adaptor for reverse flow check
· Attach on vacuum pump.
6 Refrigerant charge base
7 Refrigerant cylinder
· Only for R410A · Top of cylinder (Pink)
· Cylinder with syphon
8 Refrigerant recovery equipment
PART NAMES AND FUNCTIONS
2
•
Indoor Unit
Air intake (sucks the
air inside the room
into the unit)
In case of rear inlet
Air outlet
In case of bottom inlet