Mitsubishi Electronics PEA-A12 18AA Air Conditioner User Manual


 
17
Also consider operation sound
Do not put an object around the air outlet of the outdoor unit. It may cause lowering of capacity or increase operating sound.
If abnormal sound is heard during operation, consult your dealer.
Relocation
When the air conditioner is to be removed or reinstalled because of rebuilding, moving, etc., special techniques and work are required.
Warning:
Repair or relocation should not be done by the customer.
If this is done incorrectly, it may cause a fire, electric shock, injury by dropping of the unit, water leakage, etc. Consult your dealer.
Disposal
To dispose of this product, consult your dealer.
If you have any question, consult your dealer.
11. Installation, relocation and inspection
12. Specifications
Notes: 1. Rating conditions (cooling) Indoor : 80
°
F [26.7
°
C] D.B., 67
°
F [19.4
°
C] W.B. Outdoor : 95
°
F [35
°
C] D.B.
2. Rating conditions (heating) Indoor : 70
°
F [21.1
°
C] D.B. Outdoor : 47
°
F [8.3
°
C] D.B., 43
°
F [6.1
°
C] W.B.
3. The capacity is indicated the value when one indoor unit is connected to the outdoor unit.
4. Specifications subject to change without notice.
5. The external static pressure is set to 15 Pa at factory shipment.
Guaranteed operating range
Cooling
Upper limit
Lower limit
Heating
Upper limit
Lower limit
PEA-A12AA
Cooling Heating
12,000
0.07
7-9-11
247-317-388
116-150-183
0.02-0.06-0.14-0.20
[5/15/35/50]
23-28-33
21 [48]
Model
Function
Power supply
Capacity BTU/h
Input kW
CMM
Airflow (Lo-Mid-Hi) CFM
L/S
Ext. static pressure
in. WG
[Pa]
Noise level (Lo-Mid-Hi) dB
Weight kg [Ib]
PEA-A18AA
Cooling Heating
22,000 23,200
0.09 0.07
12-15-18
423-529-635
200-250-300
0.02-0.06-0.14-0.20
[5/15/35/50]
30-34-38
27 [60]
~/N, 208/230V, 60Hz
Outdoor
115 °F [46 °C] D.B.,
23 °F [-5 °C] D.B.,
70 °F [21 °C] D.B., 59 °F [15 °C] W.B.
12 °F [-11 °C] D.B., 10 °F [-12 °C] W.B.
Indoor
90 °F [32 °C] D.B., 73 °F [23 °C] W.B.
66 °F [19 °C] D.B., 59 °F [15 °C] W.B.
83 °F [28 °C] D.B.,
63 °F [17 °C] D.B.,
Notes: 1. Units should be installed by licensed electric contractor accordingly to local code requirement.
2. For outdoor units to be connected, refer to the Installation Manual that comes with the units.
3. Single outdoor unit (either PUY-A12,18NHA
(1)
or PUZ-A18NHA ) will be connected to each indoor unit.
KB79M101H01_en.pm6 08.9.5, 5:27 PM17