Filter
Top Products
43
11-2. MUZ-GE18NA MUY-GE18NA
NOTE: Turn OFF power supply before disassembling.
OPERATING PROCEDURE
PHOTOS
1. Removing the cabinet
(1) Remove the screws of the service panel.
(2) Remove the screws of the top panel.
(3) Remove the screw of the valve cover.
(4) Remove the service panel.
(5) Remove the top panel.
(6) Remove the valve cover.
(7) Disconnect the power supply and indoor/outdoor connect-
ing wire.
(8) Remove the screws of the cabinet.
(9) Remove the cabinet.
(10)
Remove the screws of the back panel.
(11)
Remove the back panel.
Photo 1
Photo 2
Screws
of the
cabinet
Screws
of the
back
panel
Screw of the top panel Screws of the cabinet
Screws
of the
cabinet
Screw
of the
valve
cover
Screw
of the
service
panel
Screw of the top panel
Screws of
the back
panel