Mitsubishi Electronics MSZ-GA35VA Air Conditioner User Manual


 
4
(This diagram shows an overall view.)
NAME OF EACH PART
Remote controller
PREPARATION BEFORE OPERATION
Auto restart function
These models are equipped with an auto restart function. If you do not want to use this function,
please consult the service representative because the setting of the unit needs to be changed.
Auto restart function is ...
When the indoor unit is controlled with the remote controller, the operation mode, the set temperature and the fan speed are
stored in the memory. If a power failure occurs or the main power is turned off during operation, Auto restart function sets
automatically to start operating in the same mode as the one set with the remote controller just before the shutoff of the main
power. (Refer to page 6 for details.)
Outdoor unit
Insert the power supply plug into the power outlet and/or turn the breaker on.
WARNING:
Remove dirt from the power supply plug and insert the plug securely.
If dirt adheres to the plug or insertion is incomplete, it may cause a fire or an electric shock.
Remoto controller
Use the remote controller provided with the unit only. Do not use other remote controller.
Fan speed control button
Signal transmitting section
Operation display section
Operation select button
ECONO COOL button
On-timer button
CLOCK set button
TIME set buttons
Forward button
Backward button
Temperature buttons
Vane control button
Off-timer button
RESET button
(This diagram shows an overall view.)
ON/OFF (operate/
stop) button
Open the front lid.