Filter
Top Products
8
AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT
Movement of the horizontal vane
• The vane automatically moves to horizontal position.
It will not swing.
NOTE:
Air blows out upper than position (1).
• To constantly change the air flow direction, select
(SWING) with the
VANE
button.
• Immediately after the air conditioner starts operating,
the vane stays at horizontal position. Once the air
from the indoor unit becomes sufficiently warm, the
vane moves to position (4).
• Once the air conditioner starts operating, the fan
speed increases gradually as the air from the indoor
unit gets warmer, and continues until the set speed
is finally reached.
At the start
of heating
operation
Horizontal position
Horizontal
position
When air
becomes
warm…
Position (4)
Very small
air flow
When the air flow direction is
set to position (2), (3) or (4)
• After around one hour of operation, the air conditioner
automatically moves the vane to position (1). To
change the air flow direction to the original setting,
operate the VANE button on the remote controller
again.
• The vane does not move to the straight-down position
in the COOL and DRY mode.
• Immediately after the air conditioner starts operating,
the vane stays at horizontal position. Once the air
from the indoor unit becomes sufficiently warm, the
vane moves to the position corresponding to the set
direction of air flow.
• Once the air conditioner starts operating, the fan
speed increases gradually as the air from the indoor
unit gets warmer, and continues until the set speed
is finally reached.
• The vane moves intermittently between positions (1)
and (4). The vane stops for a brief period at positions
(1) and (4).
• The vane moves intermittently between positions (2)
and (4). The vane stops for a brief period at positions
(2) and (4).
After
around 0.5
to 1 hour
Position (1)
At the start
of heating
operation
Horizontal
position
Very small
air flow
When air
becomes
warm…
Set position
NOTE:
• Adjust the vertical AIR FLOW direction using the remote controller. Moving the horizontal vane manually can
cause trouble.
• When the operation mode changes in “
(AUTO)” mode, the horizontal vane is automatically changed to the
position in each mode.
SWING
MANUAL
AUTO
COOL/DRY HEAT
Adjust the vane before operation starts.
Since the horizontal vane moves automatically, your fingers may be caught.
To change the air flow direction not to blow directly onto your body.
To change the air
flow direction
Pressing and holding
the
VANE
button for 2
seconds or more
causes the horizontal
vane to reverse and
move to horizontal
position.
Horizontal
position
When to use this function?
Use this function if you don’t
want the air from the indoor
unit to blow directly onto your
body.
• Depending on the shape of
the room, the air may blow
directly onto your body.
• Press the
VANE
button again
to return the vane to the
previously-set position.
COOL/DRY
The air conditioner starts the
cooling or drying operation
approx. 3 minutes after the
vane has moved to the
horizontal position.
• When the
VANE
button is
pressed again, the vane
returns to the previouslyset
position and the air
conditioner starts the
cooling or drying operation
in approx. 3 minutes.
HEAT
The air conditioner starts heat-
ing operation approx. 3 min-
utes after the vane has moved
to the horizontal position.
• Sometimes the area around
your feet may not warm. To
warn the area around the
feet, set the horizontal vane
to (AUTO) or the down-
ward blowing position.
• When the
VANE
button is
pressed again, the vane
returns to the previously-set
position and the air condi-
tioner starts heating opera-
tion in approx. 3 minutes.
■
To change the horizontal direction of the air flow, move the vertical vane manually.
NOTE:
• If you make the air flow not to blow directly onto your body by pressing
VANE
button, the compressor stops for 3 minutes
even during the operation of the air conditioner.
• The air conditioner operates with decreased air flow until the compressor turns on again.
(1)
(4)
(2)
(4)
SG79Y404H03 6/14/06, 10:14 AM8