Filter
Top Products
4
ON/OFF
FAN
TOO
WAR
M
TO
O
COOL
VANE
MODE
ECONO COOL
STOP
START
HR.
MIN.
WIDE VANE
LONG
I FEEL
COOL
HEAT
DRY
AMPM
CLOCK
˚C
AMPM
RESET
CLOCK
MODE
I FEEL
COOL
DRY
FAN
ON/OFF
TOO
COOL
AMPM
CLOCK
˚C
AMPM
TOO
WARM
AMPM
CLOCK
˚C
AMPM
Signal transmitting section
Operation display section
Temperature buttons
(This diagram shows an overall view.)
Open the front lid.
NAME OF EACH PART
Remote controller
COOL & HEAT type (MSH series)
PREPARATION BEFORE OPERATION
Auto restart function
■
These models are equipped with an auto restart function. If you do not want to use this function,
please consult the service representative because the setting of the unit needs to be changed.
Auto restart function is ...
When the indoor unit is controlled with the remote controller, the operation mode, the set temperature and the fan speed are
stored in the memory. If a power failure occurs or the main power is turned off during operation, “Auto restart function” sets
automatically to start operating in the same mode as the one set with the remote controller just before the shutoff of the main
power. (Refer to page 6 for details.)
Power supply
■
Insert the power supply plug into the power outlet and/or turn the breaker on.
WARNING:
Remove dirt from the power supply plug and insert the plug securely.
If dirt adheres to the plug or insertion is incomplete, it may cause a fire or an electric shock.
■
Check the type of air conditioner.
ON/OFF (operate/stop)
button
VANE button
(Horizontal vane button)
Fan speed control button
CLOCK set button
Operation select button
ECONO COOL button
WIDE VANE button
(Vertical vane button)
RESET button
Off-timer button
On-timer button
HR.button
MIN.button
(Time set buttons)
LONG button
In case of COOL ONLY type
(MS series)
In case of COOL ONLY type
(MS series)
(Refer to PREPARATION BEFORE OPERATION for details.)
NOTE
Use the remote controller provided
with the unit only.
Do not use other remote controller.
Type Model Name
COOL & HEAT
MSH-GA50/60/71/80VB
COOL ONLY
MS-GA50/60/80VB
Remote controller
■
The remote controller used for the COOL ONLY type air conditioner is different from the one used
for the COOL & HEAT type as shown in the illustrations to the left.
Check the difference of operation mode.
NOTE:
This operating instructions manual has different contents for the COOL & HEAT type air conditioner and COOL ONLY type.
Follow the appropriate instructions for each type of air conditioner.
NOTE:
Only the remote controller for the COOL & HEAT type air conditioner is illustrated as an example in this operating
instructions manual.
Type Operation Mode
COOL & HEAT
(I FEEL...), (COOL), (DRY), (HEAT)
COOL ONLY
(I FEEL...), (COLL), (DRY), (FAN)
4/21/06 2:49:12 PM