Filter
Top Products
14
10 DISASSEMBLY INSTRUCTIONS
OUTDOOR UNIT MUM18NW
1. Removing of the cabinet
(1)Remove the set screws of the valve cover to remove
the valve cover as shown in Photo 2.
(2)Remove the set screws of the side panel to remove
the side panel and cabinet.
2. Removing the propeller
(1)Remove the propeller nut.
(2)Loosen the propeller in the rotating direction.
(3)Pull the propeller forward.
Note:
● To set the propeller, fit the cut on the shaft to the
mark on the propeller.
OPERATING PROCEDURE PHOTOS
Photo 1
Photo 2
Photo 4
Photo 3
Screws
Screws
Screws
Screw
Propeller
Nut
OB202-1.qxp 26/9/97 11:08 AM Page 14