Filter
Top Products
1
Introduction
Warning
To avoid shock or injury, do not perform the verification tests or calibration procedures
described in the manual unless you are qualified to do so.
The information provided in this document is for the use of qualified personnel only.
Caution
The 2216-20 contain parts that can be damaged by static discharge.
Follow the standard practices for handling static sensitive devices.
Precautions and Safety Information
Use the Meter only as described in the Users Manual. If you do not do so, the protection provided
by the Meter may be impaired. Read the “Safety Information” page before servicing this product.
In this manual, a Warning identifies conditions and actions that pose hazard (s) to the user; a
Caution identifies conditions and actions that may damage the Meter or the te
st instruments.
The Symbols
The symbols used on the Meter and in this manual are explained in Table 1.
Table A. The Symbols
Symbol Meaning
Alternating signal
Direct signal
CAT lll IEC overvoltage Category lll
Refer to the manual, Important information.
Take appropriate precautions. Hazardous
voltage may be present.
Battery
Earth ground
Fuse
Double insulated
Do not discard this product or throw away.
++