Filter
Top Products
Connecting the extension /
telescopic wand
^
With the square hole facing the
carrying handle, insert the respective
wand into the top of the vacuum
body. Gently turn the tube until it
locks in place.
^
To remove the wand, press down on
the locking button (see inset) and pull
slightly twisting the tube.
Connecting the handle
^ Line up the square hole and the
locking button, insert the handle into
the extension / telescopic wand.
Gently turn the handle until it locks in
place.
^ To detach the two parts, press and
hold the release button (see arrow)
while gently turning and pulling off
the handle.
The handle can also be fitted directly to
the vacuum housing.
This allows for easier vacuuming of
upholstered furniture, mattresses, etc.
Assembling the vacuum
14