Filter
Top Products
,
Always disconnect the vacuum
cleaner from the electrical supply for
cleaning or maintenance work on
the hand-held Turbobrush. Switch
off at the wall socket and remove the
plug.
Removing threads and hairs
^
Cut any threads or hairs that have
become entangled on the roller brush
with a pair of scissors. Then run the
vacuum cleaner to vacuum up the
bits.
For more obstinate tangles or blockages
inside the hand-held Turbobrush, the
cover can be opened. Any large
particles inside it can then be easily
removed.
^ Turn the grip so that the release
button is in the middle of the guide
(illustration a).
^ Press the release button (illustation
b) and pull the grip out from the
hand-held Turbobrush as far as
possible (illustration c).
^
Lift the upper part of the casing as far
as it will and remove any debris from
the inside of the casing and from the
roller brush.
^
Close the casing and push the grip
back into position until it clicks into
place over the release button.
en - Cleaning and care
9