Filter
Top Products
Adjusting the suction
The suction power can be adjusted
depending on the type of flooring. By
reducing the suction power the floor
brush can be pushed easier. The
symbols on the controls indicate the
type of use the settings are suitable for:
# curtains, lightweight fabrics
$ upholstery, cushions
% thick pile carpets, rugs and
runners
* energy-saving daily use with low
noise lever
( low pile carpets
) hard flooring and intensive
cleaning of carpets
Rotary selector
^ Turn the selector knob to the desired
suction power setting.
Opening the air inlet valve
The air inlet valve is designed to
provide a quick, convenient reduction
of suction power, e.g. when moving
from a carpet to an area rug.
^
Open the air inlet valve far enough to
reduce the power.
Opening the air inlet valve reduced the
power to the tool being used.
Operation
19