Filter
Top Products
When to change the thread
lifters
The thread lifters on the suction inlet to
the floorhead and the upholstery nozzle
can be replaced.
Check them from time to time and
replace them if the pile has worn down.
To replace the thread lifters
^ Use a knife or similar object to
remove them from the slots.
^ Fit new thread lifters.
If threads or hair have wound round
the bearing on the floorhead roller
a Use a coin to release the bearing
(bayonet connection) and then pull it
out.
b Take out the roller.
Remove any threads and hair, then
replace and secure the roller.
Maintenance and care
26