Filter
Top Products
When to change the thread
catcher pads of the standard
floor brush
(depending on model)
The thread catcher pads on the bottom
of the standard floor brush (depending
on model) should be checked
occasionally. Replace the pads if they
appear worn.
Replacing the thread catchers
^ Use a screwdriver or similar object to
remove the thread catchers from the
slots.
^ Insert the new thread catchers.
Cleaning the floor brush roller
(not possible with the
AirTeQ SBD 650-3 Standard floor brush
or FiberTeQ SBD 470-3)
a Unlock the roller pin with a coin.
b Push the pin out and remove it.
c Remove the roller.
^
Remove any threads and hair from
the roller.
^
Replace roller in the reverse order.
Maintenance and care
25