Filter
Top Products
Blowing out
(depending on model)
The adapter is used to attach the
suction hose connector to the blower
connection socket so that the vacuum
cleaner can be used to blow out air,
e.g. for dusting off multi-layered
radiators and blowing dust out of
inaccessible corners so that it can be
vacuumed up. It can also be used to
blow out the suction hose if it gets
blocked.
^ Press the release button for the dust
compartment lid and raise up the lid
up as far as it will go.
^ Take out the exhaust filter or the filter
grille if this has been fitted and
replace with the blower connection
socket.
^ Close the dust compartment lid.
^
Attach the adapter to the hose
connector.
^
Now open the accessories
compartment and insert the adapter
into the blower outlet.
After use, pull firmly on the adapter to
remove it from the hose connector.
Remove the blower connection socket
and refit the exhaust filter or filter grille.
Operation
22