Filter
Top Products
Park system
A Park system has been designed for
conveniently parking the vacuum
cleaner during pauses.
^
Fit the lower clip on the floorhead into
the slot on the back of the vacuum
cleaner from above (see illustration).
Switching on and off with the Park
system
(depending on model)
Parking the floorhead in this way whilst
vacuuming automatically switches off
the cleaner. Lifting the floorhead out of
the Park system switches the cleaner
on again.
If your vacuum cleaner is equipped
with + / - suction power selector
controls you can de-activate or activate
the Park system’s On-Off function.
^ Switch the vacuum cleaner off with
the On-Off switch.
^
Press and hold the + and - controls in
and at the same time switch the
vacuum cleaner on with the On-Off
switch.
Transportation and storage
^
Stand the vacuum cleaner upright
when it is not being used and during
storage.
^
Fit both clips on the floorhead into the
two point holder on the side of the
cleaner.
This makes the cleaner easier to carry
or store.
Setting down, transportation and storage
23