Filter
Top Products
Using the standard floorhead
(standard or optional accessory de
-
pending on model)
The floorhead can be used for all nor
-
mal cleaning of carpets and rugs. It can
also be used with the brush protruding
to vacuum hard flooring which is not
susceptible to scratching. For hard
flooring, such as stone and floors which
are susceptible to scratching, e.g. par
-
quet, we recommend using one of the
special Miele floor brushes (see "Ac
-
cessories available as optional extras").
It is also important to observe the
flooring manufacturer's cleaning and
care instructions.
Fitting the standard floorhead
^ Push the suction tube into the
floorhead and turn it clockwise or
anti-
clockwise until it clicks into position.
^
To release the floorhead from the suc
-
tion tube press the locking button
(see arrow) and pull the suction tube
away from the floorhead.
To carry the vacuum cleaner by the
handle and for storage purposes fit
adapter a to the standard floorhead,
turbobrush or floorbrush and then fit the
suction tube to the adapter. The clips
on the standard floorhead, turbobrush
or floorbrush can then be fitted securely
into the two point holder on the side of
the cleaner (see "Description of the ap
-
pliance", illustration point 12).
Preparing for use
12