Filter
Top Products
Replacing the
"ActiveAirClean" filter and the
"Active HEPA" filter
^
Open the dust compartment lid.
Do not use more than one filter at a
time.
^
Remove the exhaust filter.
^ Insert the new filter.
If you wish to replace the
ActiveAirClean filter or the Active
Hepa filter with an Air Clean filter
see "Maintenance and care -
Exchanging exhaust filters".
^ Close the dust compartment lid firmly
until it clicks into place.
Resetting the filter change indicator
The filter change indicator (Reset
button) must be reset each time the
filter is replaced. To do this, the
vacuum cleaner must be plugged in.
^
Press and hold the filter change
indicator light until it goes out.
The display is now reset.
Maintenance and care
28