Filter
Top Products
Replacing one type of filter
with another
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters:
a Super Air Clean filter,
b Active Air Clean (black)
c Active HEPA (blue)
Please note
1. If you wish to replace the Super Air
Clean filter a with an Active Air Clean
filter b or an Active HEPA filter c,itis
essential that you remove the filter
grille* before fitting the new type of
filter.
2. If you wish to replace the Active Air
Clean filter b or the Active HEPA filter c
with a Super Air Clean filter a, then it is
essential that you also fit the filter grille *.
* Filter grille - see "Accessories
supplied".
The exhaust filter indicator light (with
reset button) that is fitted on certain
models is designed to come on
when the Active Air Clean or Active
HEPA filters need to be changed.
The filter change indicator light is
irrelevant if a Super Air Clean filter is
being used, as long as it is replaced
every time a new packet of Miele
dustbags is started. The indicator
light will go out when the reset
button is pressed.
Maintenance and care
27