Filter
Top Products
Changing the thread catcher
The thread catcher pads on the bottom
of the floor tool and the upholstery tool
should be checked occasionally.
Replace the pads if they appear worn.
^
Use a knife or similar object to
remove the thread catchers from the
slots.
^
Press the new thread catchers into
the slots.
Servicing the floor roller
A Unlock the axle lever.
B Pull out the roller axle.
C Take out the roller.
^ Remove all threads or hair and
reassemble the parts in the reverse
order.
Spare parts are available from your
Miele vacuum dealer or from the Miele
Technical Service Department.
Maintenance and care
29