Miele S4212 Vacuum Cleaner User Manual


 
Fitting the standard floorhead
^
Push the suction tube into the
floorhead and turn it clockwise or
anti-clockwise until it clicks into
position.
^
To release the floorhead from the
suction tube, press the locking button
(see arrow) and pull the suction tube
away from the floorhead.
The floorhead can be used for all normal
cleaning of carpets and rugs. It can also
be used with the brush protruding to
vacuum hard flooring. For hard flooring,
such as stone and parquet, we
recommend using one of the special
Miele floor brushes (see "Optional
extras").
It is also important to observe the
flooring manufacturer’s cleaning and
care instructions.
Vacuum carpets and rugs with the
brush retracted:
^
Press the foot switch ö.
Clean hard flooring which is not
susceptible to scratching with the brush
protruding:
^
Press the foot switch ä.
The Classic Allergotec floorhead, the
ACCU NOVA floorhead and the
Turbobrush
Some models may be supplied as stan
-
dard with one of these accessories (see
"Optional accessories"). Please refer to
the separate operating instructions
supplied with these brushes for
instructions on use and maintenance.
Preparing for use
12