Filter
Top Products
The vacuum turns itself off
If the vacuum detects an airflow prob
-
lem, it will shut itself off in order to pre
-
vent the motor from over heating.
This can occur anytime the airflow
through the machine is impeded. A full
or clogged dustbag, clogged filters, or
clogged wand or accessory can cause
this safety feature to activate. If this oc
-
curs, turn off the vacuum and check for
any blockages. After 20 to 30 minutes,
the vacuum will reset itself, allowing you
to turn it on and use it.
Safety feature
36