Filter
Top Products
,
Connection to the gas supply, or
conversion from one type of gas to
another, should only be undertaken
by an approved and registered gas
installer in strict accordance with
local and national safety and
building regulations (e.g. Gas Safe
registered in the UK).
Every appliance should have its own
easily accessible isolating valve and
test point.
Check with your local gas supplier
about the type of gas and its
calorific value and compare this
information with the type of gas
quoted on the hob data plate.
This appliance is not connected to
an exhaust flue. Please ensure it has
adequate ventilation after
installation.
The installer is responsible for
ensuring that the appliance
functions correctly when installed.
Depending on country, the hob is
supplied ready for connection to natural
or liquid gas (refer to label on the
appliance).
United Kingdom:
GBII2H3+20mbar, 28-30/37 mbar
Ireland:
IEII2H3+20mbar, 28-30/37 mbar
Depending on country, a set of jets for
conversion to an alternative type of gas
may be included with the hob.
Please contact your dealer or the Miele
Spare Parts Department for the
appropriate conversion jets if
necessary.
Conversion to another type of gas is
described under "Conversion to another
type of gas".
For any gas work in the UK always
use a Gas Safe registered engineer.
Gas connection
43