Filter
Top Products
The settings will be displayed for
approx. three seconds.
The robot vacuum cleaner will now start
to vacuum at the same time each day.
The Timer indicator m lights up to
show that the timer has been
activated.
To alter the entries, proceed as
described previously.
Deactivating the timer
^ Press the Timer button on the remote
control briefly.
The Timer indicator m will go out.
Pressing the Timer button again will
reactivate the timer. The Timer indicator
m will light up and the robot vacuum
cleaner will begin vacuuming at the set
start time.
Displaying a set start time
^
Press the Timer button on the remote
control briefly.
The set start time will appear in the
display.
Please remember that doing this will
deactivate the Timer. Press the Timer
button again to reactivate it.
Deactivating the acoustic signals
The acoustic signals are activated as
standard. You can deactivate and then
reactivate them.
^
Press the OK button on the remote
control for at least three seconds.
Acoustic signals for fault messages
cannot be deactivated.
Reducing the maximum crossing
over height
The robot vacuum cleaner is set as
standard so that it can negotiate a
height of up to 3/4" (20 mm).
This allows it to vacuum carpets, cross
over thresholds, etc.
If you would like to reduce this height in
order to protect chair or table legs, or
lamps for example, you can deactivate
the factory default setting.
^
Press the Base button on the remote
control for at least three seconds.
"LO" will appear in the clock indicator in
the display.
Press the Base button again for at least
three seconds if you want to reactivate
the maximum crossing over height of
3/4" (20 mm). "HI" will appear in the
clock indicator in the display.
en
17