Miele G 894 SC Carpet Cleaner User Manual


 
Running the dishwasher
^ Make sure the spray arms are not
blocked.
^ Close the door.
^ Turn on the dishwasher.
^ Press the "On/Off" button (13).
The "Start/Stop" indicator (18) will flash
and a program indicator will light.
^ Select a wash program using the pro-
gram selection buttons (21). The se
-
lected program indicator will light.
^
Refer to the "Program guide" for de
-
tails on wash programs.
^
Select "Delay Start" and "Top Solo" if
desired. See "Additional features".
^
Press the "Start/Stop" button (18).
The wash program will begin.
Do not end a program prematurely!
Important program steps could be
omitted (e. g. reactivating the water
softener).
Waterproof System
All Miele dishwashers are specially de-
signed to shut off the water intake and
drain the wash cabinet in the rare event
of an internal water valve failure.
For this feature to be active, the ma-
chine must be "On" (not necessarily
running) and the door must be closed.
Program sequence indicator
(16)
The current step of the program is indi
-
cated by the program sequence indica
-
tor (16).
Operation
32