Filter
Top Products
Changing the holding time
Step Display / Result
^
Press and hold the 0 button until the level
with the desired program block appears in the
display.
E10 for Main Wash 1
E13 for Main Wash 2
E23 for Rinse 1
E26 for Rinse 2
^
Set the program selector to the program you
wish to change, e. g., Custom.
min _ 1
^
Press and hold the ß button until the
required value appears in the display,
e.g., 10.
min _ 10
Restoring the factory settings
Step Display / Result
^ Press and hold the 0 button until E33
appears in the display.
E33
^ Turn the program selector to a program.
Default factory setting(s):
Re-programmed setting(s):
00
PP
^
When PP appears in the display, press the ß
button.
00, the factory settings have
been restored.
The water softener has been restored to the factory settings. Reprogramming is
required (see "Programming the water softener").
Program changes to the open programs "Custom", "Inorganica" and "Organica"
remain unchanged.
Programming functions
39