Miele 217-2 Vacuum Cleaner User Manual


 
The Powerbrush is recommended for
cleaning and restoring crushed carpet
pile on most types of carpets.
For cleaning non-carpeted floors, the
use of the SBD 265, SBD 285,
SBD 350, SBD 450 or SBD 550
Combination Floor Tool or the SBB 235
Smooth Floor Brush is recommended.
When vacuuming rug fringes, place the
Powerbrush on the rug and pull it over
the fringe onto the floor. Never push the
Powerbrush over fringes, as they may
become entangled in the brush roller.
For suggestions and recommendations
on which type of Powerbrush or floor
tool will work best for your application,
please contact your Miele Vacuum
Dealer.
Turning on the Powerbrush
SEB 217 with an upright vacuum
cleaner
The Powerbrush will start automatically
when the vacuum cleaner is turned on.
SEB 213 and SEB 217
The powerbrush can only be turned on
if the vacuum cleaner is also on. The
switch that controls the power brush
can be found on the hose handle.
Using the Powerbrush
^ To achieve the best results, slowly
pass the Powerbrush back and forth
over the carpet.
Operation
18