Filter
Top Products
not cover the heater
5. Keep electrical appliances out of reach from
Children or infirm persons. Do not let them
use the appliances without supervision.
Turning on the apparatus
After the hot-air heater has been placed as
desired
• The cable is rolled out
• The plug is plugged into the socket.
• The apparatus is switched on with
the turning knob.
Turn the switch/thermostat turning knob to the
desired position:
Fan-Forced convection
Switch on ‘ ’ for instant, fan-forced radiant
heat.
Room thermostat
The temperature is continuously variable via
the switch/thermostat turning knob.
Maximum temperature >> at the ‘I’ + ‘II’ (750
W + 1250 W = 2000 W)
Minimum temperature >> turn to the left up to
the anti-freezing level
Adjust the switch to ‘I’ + ‘II’ (2000W) and Max.
position of thermostat.
Once a comfortable temperature has been
reached you turn the knob to the left until the
heating turns itself off.
Overheating safety
The apparatus has been provided with an
overheating safety that turns off the apparatus
if there is a technical malfunction or if it is used
wrongly. If this happens, you must push the
switch to ‘0’ or pull out the plug. Remove the
cause or correct the malfunction. After a short
cooling down period, the overheating safety
switches on automatically and the apparatus
can be used again.
Instruction: You must always take care that
there is sufficient distance for safety (at least
50cm) between the apparatus and the wall
or the other objects. The air flow must not be
impeded by anything.
Maintenance
The apparatus does not need any mainte-
nance on the outside. Just clean it with a dry or
slightly moist cloth. The electric parts may not
get into touch with water.
_IM.indd 3 12/9/2013 3:44:22 PM