Filter
Top Products
10
11
12. Pull out the top part of the stand (10) to the
required length and tighten the collar (12)
securely over the coupling (11) to prevent the
stand from sliding down (see picture IX).
13. Attach the handle with the motor section to the
top part of the stand and secure by tightening
the clamping xture (17) (see picture X).
14. The appliance now ready for use.
Placing batteries in the remote control
Open the battery compartment by sliding off the cover at the rear of the remote
control. Insert 2 x AAA batteries as shown in the diagram at the bottom of the
battery compartment and replace the cover.
• If the appliance does not respond, or responds slowly, when activating the
remote control, it could be because the batteries need replacing.
• Always replace both batteries at the same time.
• Never mix different types of battery (e.g. manganese dioxide batteries and
alkaline batteries), old and new batteries or different makes of batteries.
• Remove the batteries from the remote control, if the appliance is not to be used
for a prolonged period.
USING THE APPLIANCE
Activate the appliance using the buttons at the control panel (9) or the remote
control.
1. Plug in and switch on the power.
2. Face the appliance in the direction where the airow is required. Alternatively,
manually tilt the motor section which is mounted on a hinge with several
adjustment positions.
3. Switch on the appliance by pressing the “On/Speed” button (switch on/speed)
(c). The appliance is switched on at lowest fan speed and a red indicator light is
lit at the position “Low”. Press the button repeatedly to change speed.
• Low. Low speed
• Mid: Medium speed
• High: High speed
4. Turn the “Swing” button (turning function) (a) to make the appliance revolve
slowly from side to side in order to better distribute the effect throughout the
room. Press the “Swing” button again to switch off the turning function. The
appliance stops in the position acquired at the time of pressing the button.
5. Switch the appliance off by pressing the “Off” button (switch off) (e).
6. Always switch the fan off at the wall socket when you have nished using it.
Timer
Use the “Timer” button (timer) (d) to set the appliance to run for a pre-selected
period, after which it automatically switches off. Press the "Timer" button repeatedly
to set the required period. One or more red indicator lights show(s) the selected
setting:
• “0.5h” (½ hour)
• “1h” (1 hour)
• “2h” (2 hours)
• “4h” (4 hours)
Thus, e.g. the period 5½ hours is set by pressing the button until the red indicator
light is lit for the positions “4h”, “1h” and o.5h”.
Return to manual mode by pressing the “timer” button repeatedly until none of the
red indicator lights are lit.
Variable fan speed
The appliance can be set to run at variable speed. Press the “Mode” button
(function) (b) until the red indicator lights at both “Normal” and “Sleep” are off.
The appliance imitates a natural breeze by varying fan speeds. The speed set by
activating the button “On/Speed” will always be max. speed.
• For instance, if you have selected medium fan speed (Mid), the appliance will
randomly change between speed Mid and Low and off.
Return to manual mode by pressing the “Mode” button until the red indicator light at
“Normal” is lit.
Sleep function
Press the “Mode” button until the red indicator light at the symbol “Sleep” (sleep
function) is lit. The sleep function works the same way as the variable speed
function, though if the fan is started at max fan speed (High), it automatically
changes to a max speed of Mid after half an hour. The fan continues to work with
this max. speed until it is switched off. Return to manual mode by pressing the
“Mode” button until the red indicator light at “Normal” is lit.
Storage
• Dismantle the base and store the appliance in its original packaging in a dry
place when it is not in use. Ensure that no dust can penetrate the appliance, e.g.
by wrapping it in a plastic bag or similar.
• Always remove the batteries from the remote control if the appliance is not to be
used for a prolonged period.
CLEANING
• Switch the apparatus off and remove the plug from the wall socket before
cleaning.
• Open the lock clips along the edge of front guard by tilting them outwards.
• Loosen the nut on the lock bolt and remove it. The front guard can now be
removed.
• Clean propeller and upper parts of the appliance by wiping with a damp cloth. A
little detergent can be added if the appliance is heavily soiled.
• Never use a scouring pad or any form of strong solvents or abrasive cleaning
agents to clean the appliance, as those may damage the outside surfaces of the
appliance.
• Never submerge the appliance in water, and no water must be allowed to get
into it.
• Fit front guard again after cleaning.
o Check front- and rear guards are locked by the lock ttings before tightening
lock bolt.
o NEVER use the appliance if the front section is missing or defective.
INFORMATION ON DISPOSAL AND RECYCLING OF THIS PRODUCT
Please note that this Adexi product is marked with this symbol:
This means that this product must not be disposed of together with ordinary
household waste, as electrical and electronic waste must be disposed of separately.
In accordance with the WEEE directive, every member state must ensure correct
collection, recovery, handling and recycling of electrical and electronic waste.
Private households in the EU can take used equipment to special recycling stations
free of charge. In some member states you can, in certain cases, return the used
equipment to the retailer from whom you purchased it, if you are purchasing new
equipment. Contact your retailer, distributor or the municipal authorities for further
information on what you should do with electrical and electronic waste.
WARRANTY TERMS
The warranty does not apply:
• if the above instructions are not followed
• if the appliance has been interfered with
• if the appliance has been mishandled, subjected to rough treatment, or has
suffered any other form of damage
• If faults have arisen because of faults in your electricity supply.
Due to the constant development of our products in terms of function and design,
we reserve the right to make changes to the product without warning.
QUESTIONS AND ANSWERS
If you have any questions regarding use of the appliance and cannot nd the answer
in this user guide, please try our website at www.adexi.eu.
Go to the "Consumer Service" menu, click on "Question & Answer" to see the most
frequently asked questions.
You can also see contact details if you need to contact us for technical issues,
repairs, accessories and spare parts.
IMPORTER
Adexi Group
We cannot be held responsible for any printing errors.