Filter
Top Products
KEY TO THE VACUUM CLEANER'S
PARTS
1. Handle
2. Air valve
3. Telescopic tube
4. Hose
5. Locking mechanism
6. Hose connector
7. Carrying handle
8. Vertical parking holder
9. Storage compartment for special
nozzles
10. Handle for opening dust bag
container
11. Exhaust grille
12. Handle for removal of exhaust grille
13. Start/stop button
14. Suction force regulation
15. Button for automatic cord rewind
16. Bag change indicator
17. Vertical parking holder
18. Floor nozzle
19. Brush change button
20. Furniture nozzle
21. Joint nozzle
PREPARING THE VACUUM
CLEANER
• Fit the hose on the vacuum cleaner by
inserting the rotating hose connection
(6) into the vacuum cleaner until you
hear a click. To remove the hose, press
the button at the side of the hose
connection and pull it out.
• Fit the telescopic tube (3) into the other
end of the hose, and fit the floor nozzle
(18) to the end of the tube.
•You can adjust the length of the
telescopic tube by pushing the locking
mechanism (5) down and pulling in the
bottom section of the tube to a suitable
length. When parking, shorten the tube
as far as possible.
• The vacuum cleaner’s 2 special nozzles
(20& 21) are kept in the storage
compartment (9). Remove the floor
nozzle and fit the special nozzle
required to the end of the telescopic
tube.
19
1.
2.
3.
4.
5.
6.
7.
9.
10.
11. 12.
15.
16.
8.
18.
19.
21.
20.
14.
13.
17.
IM_640058 28/11/05 13:47 Side 19