Filter
Top Products
OPERATION
- Do not remove the plug from the socket
by pulling the cable or the appliance
itself.
- Do not run the appliance over the
power cable.
- Do not use the appliance to vacuum up
lit matches, cigarette ends or hot ashes.
- Do not use the appliance on wet
surfaces.
- Do not obstruct the air intake or the air
outlet vents.
- Do not use the appliance to vacuum up
needles, drawing pins or string.
ASSEMBLING THE VACUUM CLEANER:
Fitting the tube:
- Press the buttons on the end of the
tube and insert the tube into the air-
intake.
Removing the hose:
- To release the hose, press the buttons
on the end of the hose and pull the
hose firmly from the air intake duct.
FLOOR BRUSH USE
- Press the button on the floor brush, so
the brush is shown for cleaning hard
floors
- Press the other button to withdraw the
brush for cleaning carpets.
INSTRUCTIONS FOR USE
- Before using the appliance, unwind a
sufficient length of cable and insert the
plug into the power socket. A yellow
mark on the power cable shows the
ideal cable length. Do not extend the
cable beyond the red mark.
To rewind the power cable, press the
rewind button with one hand, and guide
the cable with the other hand to ensure
that it does not whip causing damage.
- Press the ON/OFF button to switch the
appliance on.
REPLACING THE DUSTBAG:
After removing the hose, open the front
cover by pressing the lock lever and pulling
upwards.
Remove the dustbag-holder.
Remove the dustbag from the holder.
Replace the dustbag by inserting the carton
of the dustbag into the grooves of the
dustbag-holder.
REPLACING THE MOTORFILTER
The motor-filter is the filter placed behind
the dustbag:
Open the front cover, and gently pull out the
filter free of the holder.
Insert a new motor-filter.
REPLACING THE EXHAUST-
MICROFILTER
The exhaust-filter is the filter placed on the
back of the vacuum cleaner:
Press the release-button on the exhaust
grating and pull it out at the same time.
Remove the exhaust-filter and insert a new
exhaust-filter.
Insert the exhaust grating back in place.
A cutting-filter is supplied together with the
original dustbags. This filter can be cut to fit
both the motor and the exhaust filter. Please
use the existing filter as a template
EXTRA FEATURES
The cleaner has two wheels at the rear and
a multi-directional swivel wheel at the front
so that it can be moved easily. It also has a
convenient carrying handle.
Before storing your cleaner rewind the
supply cord. The cleaner may be stored
standing on its end to save space.
15
JCV-3001_640045_IM 10/10/05 9:39 Side 15