Filter
Top Products
Service and Maintenance (cont'd)
Element Cleaning/
Replacement (cont'd)
15. Reconnect the two wires to the element and then check 18. Replace access panel.
to make sure the high limit remains firmly against the
surface of the tank. 19. Turn "ON" electric power to water heater.
%
16. Upper High Limit Only - Replace terminal cover on
high limit making sure that the locking tabs on the ter-
minal cover are in place.
E
T i_,r
Tc _
17. Press the insulation back in place so that it completely
covers the thermistor, upper high limit and element.
30